How to Replace Window Handles
Over time, natural conditions and use over time can reduce the functionality of a window handle to the point where it needs replacing. It is essential to take care of the problem as soon as you detect damage or a decrease in performance.
Replacing the window handle is easy and involves just a few steps. Take off the screws' covers first, then the handle and the screws.
Replacement Parts
Window handles are one of the most used parts of the uPVC double glazing window and, therefore, are prone to wearing out. If you are replacing a window that has broken it is essential to have the right replacement components, whether you require an espag handle or cockspur lock. This will enable you to restore your windows back to working order and improve the security of your home.
You can locate an alternative uPVC hand here:
After you have done that, you will need to cut the spindle the proper size. You can employ an angle grinder or hand saw to do this. It's important that you make the cut correctly, as not cutting the spindle may cause the window handle not fitting properly or even falling off completely.
After you have cut the spindle to the correct size, you can now fit your new uPVC window handle, this is quite easy. It's important that you ensure that the handle is open or locked position while doing this to allow you to reach the screw holes and match the holes in the old one and then screw them into place. After you have installed the new handle it is a good idea to change the screw covers to stop dust or debris from getting into the holes.
It is important to note that the screws required to put on a uPVC handle differ from those needed to remove the handle. Therefore, it's best to double-check that you have the correct screws prior to purchasing. The majority of our handles come with all the tools needed to replace an old handle and install a brand new one.
If you need any further help or advice about replacing your uPVC doors and windows then don't hesitate to get in touch with us here at Bridgewater Glass. Our experts are ready to assist you with any issues that you may have and can offer expert uPVC window repair services.
Measure the Spindle
The square metal bar that runs through the back of the handle, and then into the lock mechanism is called a spindle. Before you can replace the handle, you must find the spindle. Usually, it is held in place by pins or screws, which can be removed with a screwdriver. When you are removing the handle that was previously attached it is recommended to clean the area it is attached to the window frame using a damp cloth. This will make the removal process of the handle much easier.
Remove door handle repairs woodley or pins off the window frame as well as the handle. This will allow you to slide the new handle in place and screw it in. Make sure you align the holes for screws on the handle with the holes on the window frame so that they match. Replace any screws that are missing.
Window handles come in various sizes and styles. But the most important characteristic is that all of them are designed to fit the same type espagnolette bolts found on uPVC or timber windows. You can easily change the look of your windows with a brand new handle design. You can find tilt and turn handles which meet Secure by Design requirements.
You can choose between a variety of locks and finishes in addition to the design. Some of them include key-locking and a push-button that lock the door when it is closed. You can also choose between a cranked or inline handle that offer more hand clearance against the window and the latter one being a bit more tidy.
Check the handle to ensure it works correctly and securely. If you are happy with the outcome you can remove the handle (if required) and replace the screw caps. This will leave you with an elegant, modern replacement for your uPVC window handles. The handles are available in a variety of black, white, chrome, gold and dark bronze finishes. They can be supplied with a standard or extended spindle length and are suitable for all types of uPVC windows.
Remove the Old Handle
Window handles can make a massive impact on the overall appearance of a window. Selecting a handle for a window is a delicate choice. Handles come in a range of styles, materials, and finishes. It is important to select one that is in line with the design of your window. It is also important to think about what kind of window you have as some styles will not be compatible with other styles.
Espag handles are typically found on uPVC windows and are available in two varieties: in-line and cranked. In-line handles are straight and can turn left or right and these are sometimes called universal window handles. Cranked handles have a tiny curving piece in the back that you can move to open or close the window. they are available in left and right-handed versions.
If you have windows that are tilt and turn you'll need a different type of handle that is compatible with this type of opening mechanism. These handles are similar to espagnolette but they have a square spindle on the back that is a part of the gearbox within the lock mechanism. The spindle's diameter is typically 7mm, however there are handles with larger cross-sections that are suitable for windows made of wood.
In addition, you need to consider the step height when choosing the handle you want to purchase. This is the distance from the bottom of the nose of the handle to the frame and it is very important to have this right.
It's time to test your new handle. You can accomplish this by using the Javascript executor to navigate and click on different elements of a web page. In particular, you'll want to use the window handle function which collects all handles on the page and prints them out. This allows you to recognize the parent window handle, and then create child windows to perform various actions on a website and then return to the parent window. If you have any questions about using the window handle function read the Selenium guide.